Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN bus. It's subtle, doesn't have keys or LEDs and is concealed in the wiring of the vehicle.
The user can also disable the system temporarily by using Transport Mode when renting out their vehicle. This guide will walk you through the installation of the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key hacking attacks, cloning and relay attacks. The system connects directly to your car's ECU and is protected by a unique PIN code that you can choose. It is undetectable by thieves using diagnostic scanners and other advanced methods. It cannot be disabled by cutting circuits.
The system is simple to use, however it is essential to have a an expert installation to ensure a clean and secure connection with your vehicle's ECU. A Thatcham-approved installer can help with the installation and programming of your Ghost system. They can also recommend a tracking or alarm system to complete the protection package for your vehicle.
First, the installer must disconnect the battery to prevent accidental airbag deployment or short circuits. After that the installer is able to safely begin work. Basic hand tools are helpful for securing connections with precision and a multimeter may be used to check electrical values and ensure safety. Insulation tape and cable tie are vital to secure connections and keep wiring neat. The Ghost Immobiliser user's guide will provide specific instructions tailored to your model.
During the installation, it is important to choose the right grounding location that is free of debris and paint. The installer should also make sure the immobiliser's CAN H and CAN L wires are connected to the appropriate ports on your vehicle's ECU. These wires can be connected or soldered based on the model. A quality connector is recommended to ensure a long-lasting and reliable connection.
Once the installation is complete Once the installation is completed, the customer can enable Transport Mode. This permits mechanics or valet parking to use the vehicle without having to know the pin code. The customer has to press the service icon on the dashboard five times within 2 seconds. The system will confirm this by displaying five indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's an excellent choice for those who rent their vehicles regularly on platforms such as Turo. An immobiliser can reduce insurance premiums, since it greatly reduces the chance of theft.
Getting Started
You won't have a problem with an autowatch ignition device if you want to protect your car from theft. It will stop your car from being started even when a criminal steals or copies the key. It is possible because of its advanced technology that prevents the engine from starting until the correct PIN code has been entered.
The device is connected to the vehicle's bus system CAN, allowing direct communication with the ECU. It uses existing buttons on the dashboard and the steering wheel to create a unique sequence only you can identify, making it impossible for someone else to start your car. This is the best security system to protect your car's pride and joy and will ensure its value when you want to sell it in the future.
Installing an immobiliser from Ghost is simple however, you must follow the directions to avoid electrical issues and malfunctions in the system. First, you must locate and identify a constant 12V power source and a good grounding point on the vehicle's chassis. Then, you'll be able to begin connecting the wires to the immobiliser. Make use of high-quality connectors and soldering techniques to ensure a solid connection. Make sure to shield the connections with heat shrink tubing, insulation tape or other materials to avoid electrical short circuits.
After the wires have been connected, you can connect the battery and turn on the engine to test the function of the immobiliser. If everything is functioning properly, you can install it in a secure location under the dash or somewhere else in the vehicle. Be sure to cover it properly to stop thieves from getting into it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified This means it meets the highest standards of security and is a great protection against car thieves. It is invulnerable to hacking and key cloning and cannot be disabled without a code. The device is easy to use, and can be set up to an option for a service valet so that your vehicle won't be activated if you bring it to an MOT or for servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system that is specifically designed to deter theft of vehicles. It connects directly to the vehicle's CAN bus network and communicates with the ECU which makes it a virtually undetectable addition to your vehicle. Contrary to other aftermarket systems which require the removal of circuit components, the Ghost Immobiliser doesn't interfere with any of your vehicle's factory settings.
The system is also undetectable by thieves using diagnostic scanning tools. This is due to the fact that it does not transmit and receive radio frequency signals, and it relies on the CAN data format to communicate with your ECU. Furthermore, it doesn't require any modifications to your vehicle's existing key fobs.
Enter your disarm sequence (either two or one buttons) and turn on the ignition of your car to activate Ghost Immobiliser. The indicator will flash twice to verify that you have entered the correct code. Once you've verified this, you're able to start your vehicle and leave with peace of mind.
Once installed, the Ghost Immobiliser guards your vehicle from hacking or key cloning while protecting its value. If you ever have to hand over your vehicle to valet parking or for service, the Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete the Ghost Immobiliser installation, you'll need locate an energy source that is constant (12V) and an earthing point. Be sure that both are well-insulated and able to be touched. Cable ties are also suggested for bundling and securing the wires. This will reduce the risk of theft by potential thieves. Be sure to verify the location of these points to avoid making mistakes and mark them with an adhesive or label. It's important to check all connections for signs wear and tear. Loose visit this page can lead to problems with the system, so be certain that they are securely in place and securely insulated. Finally, don't forget to test the Ghost Immobiliser after installation is complete. This will make sure that the unit functions correctly and that all connections are secure and insulated. If there are any issues, be certain to fix them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that is integrated into your vehicle's ECU to stop unauthorized engine start. Its cutting-edge technology protects your vehicle from key cloning and hacking and other common methods used by thieves to steal cars. The Ghost works in conjunction with existing alarm and tracking systems to provide the best security for your vehicle. The Ghost's unique features, paired with its discreet design, make it a popular option for both car enthusiasts as well as security-conscious drivers.
It is important to follow the steps of installation in order to ensure a proper integration of Ghost Immobiliser. The best place to start is to look over the wiring diagram for your vehicle that will serve as a guideline to locate and connecting the wires required. After that, you'll need determine the power source and grounding points. Once you've identified these you'll be required to mark them so that they're easy to identify when installing. Finally, it's important to use top-quality tools and materials. Basic hand tools can assist in making connections that are precise and a multimeter can confirm electrical values and guarantee safety. Cable tie and insulation tape will ensure that all connections are tidy. Also, a user's guide will provide specific guidance tailored to your Ghost model.
It is crucial to test the system prior to installing it. Enter the PIN code into the system, and then start the vehicle. This step will confirm the immobiliser is working as it should and stop unauthorised vehicle starts. This step should be done regularly as part your regular inspections of your vehicle to ensure that the system is always working correctly.
Once the installation has been completed, you are now able to start driving your vehicle with confidence. The Ghost will safeguard your car from would-be car thieves. It will ensure that no one is able to escape with your car if they do not have the correct PIN code. The Ghost can be linked to an approved Thatcham tracker, which detects attempts to steal or tamper with. This will allow you to locate your car if it's stolen.
The Ghost is compatible with a variety of vehicles, including those from most major manufacturers. If you're interested in securing your car with this innovative device, call Monty's Locksmith today to find out more about our installation and maintenance options. We are a TASSA registered installer, a certificate that guarantees we follow strict standards for installing our products. This assures customers, insurance companies, and law enforcement that all installations are completed safely and correctly.